Today we are discussed on Big difference between Arduino UNO and Raspberry Pi.
Introduction : Arduino UNO
As we all know, Arduino is a microcontroller board, not fully computers. In this, written codes are simply executed without any obstacle. It is an 8 bit Atmel AVR Micro-controller which comprises of 32K and 512K of on board flash memory, 2K of RAM, runs at 8-84MHz clock speeds with voltages of 2.7V-12V.programming is done using C and carries no operating system. Code is written in computer and then sent through USB cable for execution. Its construction simply covers digital input output pins that are between 9-54 AND 6-12 analog input pins. Its power consumption is less then 0.5 watt.
Buy Arduino UNO – Click here
Introduction : Raspberry Pi
Raspberry-Pi is a single board microcontroller with 32 bit memory. It is fully computer using BCM2835 SoC ARM Processor running at 700 MHz’s. Systems on chip include a video controller with a hardware mp4 encoder/decoder, a CPU, an Ethernet controller and a USB Controller. For memory storage SD card is utilized because RAM for revision board A is 256M and RAM for current revision board is 512M. Usually Linux version is used on boards which are simply connected using a keyboard and mouse to computer screen for monitoring. It has 8 GP I/O pins, UART, I2C, SPI and I2S for I/O programming. Its power consumption is 3.5 watt.
Buy Arduino UNO – Click here
What is the purpose of Arduino Board and Raspberry Pi board?
- The main purpose of Arduino board is that it reacts to sensors and devices that further helps in projects for interfacing and reacting to various sensors for accurate readings. Arduino handles the actuation of devices and gathers data from the sensors.
- Raspberry pi Board for projects count reasonable charges and cover all computer functions on a single board. It’s compatible to LINUX version which is usually being utilized in raspberry pi projects.
Comparison in terms of their specifications:
- Sensors: Arduino has various interfacing ports, so it’s easy to connect analog sensors to arduino board. Sensors react eventually according to programming set in microcontrollers. Even series of commands respond to sensor data while adjusting to servos and devices. Whereas pi on the other hand requires software to interface effectively with devices that are used less. While preparing project, arduino and raspberry pi both can be used simultaneously. Arduino control board executes commands that are being issued by the pi software, before the sensor information is fed back for recording or responding.
- Power Requirements:In arduino, battery backup is durable and keeps the voltage above certain level. Even if the power drops on the arduino, system won’t show corrupt operating system neither it will stop the code processes. It will easily start running code when plugged in again.Raspberry pi requires more power supply with additional hardware in order to move with constant power needed. It works on 5V power supply and works like a traditional computer.
- Network: The Pi has a built-in Ethernet port, which allows easy access to any network with little setup. Wireless Internet on the Pi isn’t hard to achieve either, you just have to buy a USB Wi-Fi dongle and install a driver. Once you’re connected, you can use the OS to connect to Web servers, process HTML, or post to the Internet. You can even use it as a VPN or print server.Unfortunately, the Arduino isn’t built for network connectivity directly. You’ll need an extra chip prepared with an Ethernet port, and you’ll need to do some wiring and coding in order to get everything up and running which is enough of a process that some vendors sell comparable versions of the Arduino with built-in Ethernet.
When to use arduino?
When to use raspberry pi?
|It’s a good choice when device is constantly running and requires little communication. Its main task is to read sensor data and change sensor data and values on motors.
||Operations in raspberry pi are easily managed whether connected to internet to read and write data, monitor any media or connect to an external display.
Projects for Beginners:
|Arduino projects for Beginners
||Raspberry Pi projects for Beginners
|Simple arduino alarm system
||Card board case
|The traffic light controller
||Pi powered computer
|Companion cube mood lamp
||Personal web server
|Arduino powered temperature controller
|The TV devil Arduino prank remote
||Solar powered raspberry pi
||Pandora jukebox and air play receiver
|Powered laser turret
||Build a one button audio book player
That’s all in Diffrence betwwen Arduino UNO & Raspberry-Pi.
Keep Connect with us.
We’ll come again with an Interesting & Informative Blog.