Category: Tutorials

AVR Parallel and Serial Programming

Atmel has designed AVR microcontrollers for maximum flexibility of programs.There are three ways to load a program into AVR microcontrollers explained below.

Arduino

Interfacing L293d with Arduino

This is the first post on Arduino tutorial in this blog.Arduino is an opensource software and easy platform for beginners to learn. In this arduino tutorial let us

Atmel AVR

Installing USBASP in Windows 08

Installing USBASP in Windows 08 is not same as installing Windows 07 Operating System. We have to disable Device Signature on Windows 08. Download the following drivers from www.fischl.de/usbasp/ and

Tutorials

Dancing LED using Atmega32 Microcontroller

In this tutorial let us see how to interface 8 leds to Atmega32 Microcontroller. The LED’s will run from starting point to ending point and also one by

momentary-push-button-switch-12mm-square

Atmel AVR

Buzzer I/o interfacing to Atmega32 MicroController

In this article let us see how to interface buzzer and push button to Atmega32 avr Microcontroller as I/o operations.This article is the best for learners to understand

Tutorials

Interfacing 16×2 lcd with atmega16/32 AVR

To interface LCD with the microcontroller in default configuration requires 3 control signals and 8 data lines.This is known as 8 bit interfacing mode which requires total 11 I/O

Tutorials

Installing Usbasp in Windows7

Usbasp is an Electronic programmer for Avr family Microcontrollers.It debugs the hexadecimal(.hex) file into Avr Microcontroller.The Usbasp programmer uses a Atmega8

Tutorials

USBasp – USB programmer for Atmel AVR controllers

Usbasp is an Electronic programmer for Avr family Microcontrollers.It debugs