Futaba S3003 Servo Motor 3.2 KG Torque for Arduino/Raspberry-Pi/Robotics

The Futaba S3003 Plastic Geared Servo Motor is a decent servo for every hobbyist and electronics student. The powerful motor is PWM controlled for easy interfacing.

Features of Futaba S3003 Servo Motor 3.2 KG Torque.

• Control System: +Pulse Width Control 1520usec Neutral
• Required Pulse: 3-5 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8-6.0 Volts
• Operating Temperature Range: -20 to +60 Degree C
• Operating Speed (4.8V): 0.23sec/60 degrees at no load
• Operating Speed (6.0V): 0.19sec/60 degrees at no load
• Stall Torque (4.8V): 44 oz/in. (3.2kg.cm)
• Stall Torque (6.0V): 56.8 oz/in. (4.1kg.cm)
• Operating Angle: 45 Deg. one side pulse traveling 400usec
• Continuous Rotation Modifiable: Yes
• Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
• Current Drain (4.8V): 7.2mA/idle
• Current Drain (6.0V): 8mA/idle
• Motor Type: 3 Pole Ferrite
• Potentiometer Drive: Indirect Drive
• Bearing Type: Plastic Bearing
• Gear Type: All Nylon Gears
• Connector Wire Length: 12"
• Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
• Weight: 1.3oz. (37.2g)

Applications of Futaba S3003 Servo Motor 3.2 KG Torque.

• It is used in Electronic projects.
• Robotic projects using 8051/AVR/PIC/ARM/NXP/Infineon microcontroller.

Also Searched as : futaba s3003 servo motor, futaba s3003 datasheet, futaba s3003 arduino, futaba s3003 spec, servo motor futaba s3003, futaba s3003 cad, futaba s3003 pinout, futaba s3003 standard servo.