• Previous
    PX4FLOW V1.3.1 Optical Flow Sensor Smart Camera For PX4 PIXHAWK Flight Control System W/ Sonar
  • Next
    Pixhawk Px4 2.4.6 32 Bit Arm Flight Controller & 4g Tf Card/Led External/Ppm Module for RC Multicopter

Mini Pixhawk Flight Control 32bit ARM Cortex M4 Pixhawk2.4.6 Hardware w/sd card/safety switch/buzzer/power module

In Stock
16,999.00
Product Code: RM2481

Delivered In: 15-20 Business Days

Description

Mini Pixhawk Flight Control 32bit ARM Cortex M4 Pixhawk2.4.6 Hardware w/sd card/safety switch/buzzer/power module

Mini Pixhawk Flight Control 32bit ARM Cortex M4 Pixhawk2.4.6 Hardware for Mulicopter FPV Photography

  • Comparing with the standard version, The revisions made on Pixhawk mini are as follows:
  • - SD card base adopts deadlock function. SD card will not be easily taken out unless press the SIM
  • - The front jacks all adopts imported the gilded needle, has better contact resistance, more stable and reliable
  • - NEC original tantalum capacitor is added in back compass and main power supply, making each sensor has stable power supplying and lesser possibility of aircraft crashing
  • - The same matte black gold plate as the original version, high quality

  • - PIXHAWK intergrated the newest 32 bit chip technology and sensor technology, get rid of the dilemma of having only 8 bit CPU of APM, and CPU occupancy being too high
  • - Size: from 81.5*50*15.5 to 60*38*14MM
  • - Weight: from 38g to 27g
  • - All interfaces are changed to 2.5.4 dupont interfaces both front and behind, convenient for cable connection
  • - The internal power supply mode is changede, adopting TI power supply plan, external input voltage can reach to 3-15V wide input
  • - The part of IMU is modue group , maximize to reduce the inteferences, more stable state

  • Pix Mini Hardware Configuration
  • Processor
  • - 32bits ARM Cortex M4 core includes FPU( floating point unit)
  • - 168 Mhz/256 KB RAM/2 MB flash memory
  • - 32bits error protection coprocessor

  • Sensor
  • - ST Mirco 12bit Gyroscope L3GD20 Upgrade to 16bit Gyroscope L3GD20H
  • - ST Micro 14bits accelerometer/ Magnetometer LMS303D
  • - MEAS barometer MS5611

  • Power supply
  • - super high performance three channels low differential pressure diode tube paralleling input
  • - any channel supports 3S, directly input and gurantee the stable work of maincontrol All external interface have complete overcurrent shortcircuit, ESD electrostatic protectionInterface
  • - 5 UART serial ports, one supports large power, two have hardware flow control
  • - Spektrum DSM/DSM2/DSM-X satellite input
  • - Futaba S.BUS input and output
  • - PPM sum signal
  • - RSSI(PWM or voltage)input
  • - I2C, SPI, two CAN, USB
  • - 3.3 and 6.6 ADC input

  • Size
  • - Weight:27g
  • - Length: 60MM
  • - Width: 38MM
  • - Height: 14MM

  • Package Include:
  • - Mini Pixhawk 2.4.6 Flight Controller x 1
  • - Original Shell X 1
  • - 8G SD Card x1
  • - Safety switch x1
  • - Buzzer x 1
  • - power module x1

Downloads

Reviews (0)

Write a review

Note: HTML is not translated!
    Bad           Good
Note : Images shown is only for representation. The actual product may vary with the picture shown.
Check out this bundle:
Bundle price:
1,250.00

You save
50.00!