Mini Pixhawk Flight Control 32bit Pixhawk2.4.6 w/SD Card /Safety Switch/Buzzer/RGB/PPM/I2C/PM/OSD /433 Telemetry/M8N GPS

Mini Pixhawk Flight Control 32bit ARM Cortex M4 Pixhawk2.4.6 Hardware for Mulicopter FPV Photography

• Comparing with the standard version, The revisions made on Pixhawk mini are as follows:
• - SD card base adopts deadlock function. SD card will not be easily taken out unless press the SIM
• - The front jacks all adopts imported the gilded needle, has better contact resistance, more stable and reliable


• - NEC original tantalum capacitor is added in back compass and main power supply, making each sensor has stable power supplying and lesser possibility of aircraft crashing
• - PIXHAWK intergrated the newest 32 bit chip technology and sensor technology, get rid of the dilemma of having only 8 bit CPU of APM, and CPU occupancy being too high


• - Size: from 81.5*50*15.5 to 60*38*14MM
• - Weight: from 38g to 27g
• - All interfaces are changed to 2.5.4 dupont interfaces both front and behind, convenient for cable connection


• - The internal power supply mode is changede, adopting TI power supply plan, external input voltage can reach to 3-15V wide input


• Pix Mini Hardware Configuration
• Processor
• - 32bits ARM Cortex M4 core includes FPU（ floating point unit）
• - 168 Mhz/256 KB RAM/2 MB flash memory
• - 32bits error protection coprocessor
• Sensor
• - ST Mirco 12bit Gyroscope L3GD20 Upgrade to 16bit Gyroscope L3GD20H
• - ST Micro 14bits accelerometer/ Magnetometer LMS303D
• - MEAS barometer MS5611
• Power supply
• - super high performance three channels low differential pressure diode tube paralleling input
• - any channel supports 3S, directly input and gurantee the stable work of maincontrol
• All external interface have complete overcurrent shortcircuit, ESD electrostatic protectionInterface
• - 5 UART serial ports, one supports large power, two have hardware flow control
• - Spektrum DSM/DSM2/DSM-X satellite input
• - Futaba S.BUS input and output
• - PPM sum signal
• - RSSI（PWM or voltage）input
• - I2C, SPI, two CAN, USB
• - 3.3 and 6.6 ADC input


• Size
• - Weight：27g
• - Length: 60MM
• - Width: 38MM
• - Height: 14MM


• Package Include:
• - Mini Pixhawk 2.4.6 Flight Controller x 1
• - Original Shell X 1
• - 8G SD Card x1
• - Safety switch x1
• - Buzzer x 1
• - SD Card Adapter x1
• - External LED light board X 1
• - PPM Module x1
• - Pixhawk-I2C Splitter Expand Module X 1
• - Neo-M8N Gps Module x1
• - Power Module x1
• - Minim OSD x1
• - 433 telemetry x1
•