• Previous
    Mini Pixhawk Flight Control 32bit ARM Cortex M4 Pixhawk2.4.6 Hardware w/sd card/safety switch/buzzer/power module
  • Next
    Pixhawk PX4 2.4.6 32 bit ARM Flight Controller & NEO-6M / 7M GPS/4G TF Card/Led External/PPM/Power Module for RC Multicopter

Pixhawk Px4 2.4.6 32 Bit Arm Flight Controller & 4g Tf Card/Led External/Ppm Module for RC Multicopter

In Stock
16,999.00
Product Code: RM2477

Delivered In: 15-20 Business Days

Description

Pixhawk Px4 2.4.6 32 Bit Arm Flight Controller & 4g Tf Card/Led External/Ppm Module for RC Multicopter

Pixhawk PX4 2.4.6 32 bit ARM Flight Controller & NEO-6M GPS/4G TF Card/Led External/PPM for RC Multicopter

- PIXHAWK intergrated the newest 32 bit chip technology and sensor technology, get rid of the dilemma of having only 8 bit CPU of APM, and CPU occupancy being too high

  • Features:
  • - with external LED -Dual Size full angle LED
  • - Advanced 32 bit ARM CortexM4 high performance processer, can operate NuttX RTOX real time operation system
  • - 14 PWM/ Servo Output
  • - Bus interface(UART,I2C,SPI,CAN)
  • - Intergrated back up power and lose efficacy controller, main controller lose efficacy can safely alter to back up control
  • - Providing automatic and manual mode
  • - Providing redundant power supply input and failover
  • - Multicolor LED light
  • - Providing multi sound buzzer interface
  • - Micro SD records flying data

  • Hardware parameters

  • Processor:
  • - 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit
  • - Main frequency: 168MHZ,256K RAM
  • - 32 bit STM32F103 back up processor

  • Sensor:

  • - L3GD20 3 axis digital 16 bit gyroscope
  • - LSM303D 3 axis 14 acceleration/magnetometer
  • - MPU6000 6 axis acceleration/magnetometer
  • - MS5611 high precision barometer

  • Interface:
  • - 5 UART, one compatible high voltage, two have hardware flow control
  • - Two CAN
  • - Spektrum DSM/ DSM2/ DSM-X satellite receiver compatible input
  • - Futaba SBUS compatible input and output
  • - PPM signal input
  • - RSSI(PWM or voltage) output
  • - I2C
  • - SPI
  • - 3.3 and 6.6VADC input
  • - External MICRO USB interface
  • - Compare to the old version 2.4.5, the final release 2.4.6 Version is added two components: D1002 and F1002
  • - D1002 model: PMEG2005CT
  • - This version of flight control can solve the problem of small supply current for receiver, and the flight control system halted caused by overcurrent supply
  • NEO-6M GPS Specification: (6M GPS for Pix Link)
  • - Inner chip UBLOX NEO 6M
  • - With EEPROM memory funcion
  • - Baud rate 4800-115200
  • - Refresh rate 1-5Hz
  • - Cable length 25cm
  • - Support rod length: 12cm
  • - Red cable- VCC
  • - Black cable- GND
  • - Yellow cable- TXD
  • - Green cable- RXD

  • package including :
  • - Pixhawk px4 2.4.6 32 bit ARM Flight Controller X 1pcs (with original DF13 connector )
  • - Original shell X 1pcs
  • - Buzzer X 1pcs
  • - PPM module X 1pcs
  • - Safety button X 1pcs
  • - External LED light board X 1pcs
  • - 4G SD Card X 1pcs(we have updated it to 8GB SD Card for free instand of the 4GB SD Card Friend, when you pay it, we will send you the 8GB SD Card)
  • - SD Card Adapter X 1

Downloads

Reviews (0)

Write a review

Note: HTML is not translated!
    Bad           Good
Note : Images shown is only for representation. The actual product may vary with the picture shown.
Check out this bundle:
Bundle price:
999.00

You save
50.00!