Pixpilot v2.4.6 (Pixhawk) open-hardware Autopilot Flight Controller +I2C+RGB+ Neo M8N GPS +Minim OSD+PM +433 Telemetry

Comparing with the standard version, The revisions made on Pixhawk mini are as follows:

• SD card base adopts deadlock function. SD card will not be easily taken out unless press the SIM.
• The front jacks all adopts imported the gilded needle, has better contact resistance, more stable and reliable.
• NEC original tantalum capacitor is added in back compass and main power supply, making each sensor has stable power supplying and lesser possibility of aircraft crashing.
• The same matte black gold plate as the original version, high quality.
• PIXHAWK intergrated the newest 32 bit chip technology and sensor technology, get rid of the dilemma of having only 8 bit CPU of APM, and CPU occupancy being too high.
• Size: from 81.5*50*15.5 to 60*38*14MM.
• Weight: from 38g to 27g.
• All interfaces are changed to 2.5.4 dupont interfaces both front and behind, convenient for cable connection.
• The internal power supply mode is changede, adopting TI power supply plan, external input voltage can reach to 3-15V wide input.
• The part of IMU is modue group , maximize to reduce the inteferences, more stable state.

Pix Mini Hardware Configuration

• 32bits ARM Cortex M4 core includes FPU（ floating point unit）.
• 168 Mhz/256 KB RAM/2 MB flash memory .
• 32bits error protection coprocessor .

Sensor

• ST Micro L3GD20H 16 bit gyroscope.
• ST Micro LSM303D 14 bit accelerometer / magnetometer.
• MEAS MS5611 baromete.

Power supply

• super high performance three channels low differential pressure diode tube paralleling input.
• any channel supports 3S, directly input and gurantee the stable work of maincontrol .
All external interface have complete overcurrent shortcircuit, ESD electrostatic protection.Interface.
• 5 UART serial ports, one supports large power, two have hardware flow control .
• Spektrum DSM/DSM2/DSM-X satellite input .
• Futaba S.BUS input and output .
• PPM sum signal .
• RSSI（PWM or voltage）input.
• I2C, SPI, two CAN, USB.
• 3.3 and 6.6 ADC input .

Size

• Weight：27g.
• Length: 60MM.
• Width: 38MM.
• Height: 14MM.

Package Included:

• Mini Pixhawk 2.4.6 Flight Controller x 1.
• Original Shell X 1.
• 8G SD Card x1.
• Safety switch x1.
• Buzzer x 1.
• SD Card Adapter x1.
• External LED light board X 1.
• PPM Module x1.
• Pixhawk-I2C Splitter Expand Module X 1.
• 7N Gps Module x1 .
• Power Module x1 .
• Minim OSD x1.
• 433 telemetry x1.