Quadcopter Combo Pack with 6 Channel Transmitter & Receiver Using KK 2.15

This Quadcopter combo kit is complete Do it Self quadcopter. It includes everything to fly your own drone out of the box. To start flying just unbox, power on transmitter, and connect battery to aircraft, arm and start flying.

Features of Quadcopter Combo Pack with 6 Channel Transmitter & Receiver Using KK 2.15:

• tested combination of frame, motors, esc, propellers, flight controller, radio, etc.
• Gyro + Accelerometer + Magnetometer IMU for full control, Onboard data flash for logging, 
• flight time up to 15 minutes.
• various modes for manual, autonomous and semi-autonomous control
• fully assembled and tuned - requires about 8 hours assembling, configuring and tuning from kit.

Applications of Quadcopter Combo Pack with 6 Channel Transmitter & Receiver Using KK 2.15:

• DIY Quadcopter projects.
• Quadrotor (quadcopter).
• Electrical/Electronic projects.

Kit Content of Quadcopter Combo Pack with 6 Channel Transmitter & Receiver Using KK 2.15:

• 1 x Glass Fiber Quadcopter Frame with Integrated PCB Version
• 4 x Brushless DC Out runner Motor 1000 KV
• 4 x BLDC ESC 30 A
• 2 x 10 x 4.5 inch Pusher and Puller Propeller Matched Pair
• 1 x kk multi copter control board V 2.15
• 1 x 2.4GHz 6-Channel Transmitter & Receiver

Required of Quadcopter Combo Pack with 6 Channel Transmitter & Receiver Using KK 2.15:

• 1 x 2200 mAH 3s 11.1v Li Po battery
• 1 x Balance Charger